WA-0108/B Antenna Distribution Unit - Preliminary Information

WA-0108/B Antenna Distribution Unit - Front Panel

The WiNRADiO WA-0108/B antenna distribution unit combines a low-noise amplifier and power splitter device in an optimum combination, particularly suited for VHF marine and sonobuoy telemetry applications where a single antenna needs to be connected to up to 8 receivers. While this model is particularly suited for WiNRADiO multichannel receiver systems such as the MS-8118/WSB Multichannel Sonobuoy Telemetry System, it can be also used with any third-party receivers and antennas.

Features

 VHF frequency range from 137 to 180 MHz
 Inbuilt low-noise preamplifier
 One antenna input, 8 receiver outputs
 High IP3 amplifier
 High isolation between ports
 Rack mount 1RU 19" enclosure
 Custom configurations available

Internally, the product consists of a low-noise preamplifier with a high third-order intercept point, followed by a high-isolation power splitter.

The WA-0108/B antenna distribution units are eminently suitable for broadcasting, industrial, government, military and other demanding high-end applications.


Rear Panel

WA-0108 Antenna Distribution Unit - Rear Panel

 

The single antenna input and 8 outputs use SMA-type connectors located at the rear of the device. The fused mains power socket accommodates standard US and European voltages using a standard IEC computer power cord.

Technical Specifications
Configuration 1 input, 8 outputs
Frequency range 137 to 180 MHz
Gain 10 dB @ 150 MHz
Amplifier NF 1.1 dB
Impedance 50 ohm (input and all outputs)
Max. input level +13 dBm for no damage
Input IP3 +10 dBm
Isolation 50 dB typ.
Phase unbalance 1.5 dB typ. @ 150 MHz
Amplitude unbalance 0.5 dB typ. @ 150 MHz
Input VSWR 1 : 2.0
Output VSWR 1 : 1.3
RF Connectors 9 x SMA female
Power 120/240 V AC 15 W
Dimensions Width: 19" rack
Height: 1RU (1.75" = 44.5 mm)
Depth: 14.4" (365 mm)
Weight 13 lb (6 kg)

Specifications are subject to change without notice due to continuous product development and improvement.

 

Interested? Please use our Rapid Response Form to register your interest in this product, or to request more information.