WR-G526e/DSP Detailed Technical Specifications - Preliminary

WR-G526e/DSPC Coherent DSP Back-End

Input frequency range 100 kHz - 33 MHz (up to 200 MHz with filter bypass)
Input impedance 50 Ω
Full scale input level +10 dBm
Anti-aliasing filter 13th order, bypassable
Anti-alias rejection >120 dB
ADC conversion 16 bit, 100 MSPS
SFDR >85 dB
Snapshot memory 1 GB (5 second snapshot of raw data)
DDC channels up to 4
DDC bandwidths 20 kHz to 20 MHz in 31 Steps
DSP type Blackfin 16 bit dual-core
DSP computing power 2.4 GMAC/s
DSP serial port number 2 ("North and South" daisy chain)
DSP serial port speed 60 MSPS full duplex
DSP serial port connectors 2 x RJ45
LVDS ouput port 2 Gbit/s, RJ45
Operating voltage 12 V DC ±5%
Power consumption 8 W typ.
Dimensions 150 x 90 x 30 mm (5.9" x 3.5" x 1.2")
Weight 460 g (16.2 oz)
Operating temperature -10° to +60° C
Humidity 20-90% non-condensing

WR-G526e/DSPR Reference Oscillator, Trigger and Distribution Module

Total oscillator phase noise -150 dBc/Hz @ 10 kHz
GPS 1 PPS input impedance 50 Ω
GPS 1 PPS input level TTL, LVTTL, LVCMOS, programmable polarity
External trigger input impedance 50 Ω
External trigger input level TTL, LVTTL, LVCMOS, programmable polarity
External reference input impedance 50 Ω
External reference input level 0.5-2 Vpp
Frequency stability 0.01 ppm
Operating voltage 12 V DC ±5%
Power consumption 8 W typ.
Dimensions 150 x 90 x 45 mm (5.9" x 3.5" x 1.8")
Weight 450 g (15.9 oz)
Operating temperature -10° to +60° C
Humidity 20-90% non-condensing

WR-G526e/DSPS Integrated Single-Channel Back-End Module

Input frequency range 100 kHz - 33 MHz (<250 MHz with filter bypass)
Input impedance 50 Ω
Full scale input level +10 dBm
Anti-aliasing filter 13th order, bypassable
Anti-alias rejection >120 dB
ADC conversion 16 bit, 100 MSPS
SFDR >85 dB
Snapshot memory 1 GB (5 second snapshot of raw data)
DDC channels 4 (DDC bandwidths <= 2MHz)
1 (DDC bandwidths 2-10 MHz)
DDC bandwidths 20 kHz to 20 MHz in 30 Steps
DSP type Blackfin 16 bit dual-core
DSP computing power 2.4 GMAC/s
DSP serial port number 2 ("North and South" daisy chain)
DSP serial port speed 60 MSPS full duplex
DSP serial port comnnectors 2 x RJ45
LVDS ouput port 2 Gbit/s, RJ45
GPS 1 PPS input impedance 50 Ω
GPS 1 PPS input level TTL, LVTTL, LVCMOS, programmable polarity
External trigger input impedance 50 Ω
External trigger input level TTL, LVTTL, LVCMOS, programmable polarity
External reference input impedance 50 Ω
External reference input level 0.5-2 Vpp
Frequency stability 0.01 ppm
Operating voltage 12 V DC ±5%
Power consumption 8 W typ.
Dimensions 150 x 90 x 45 mm (5.9" x 3.5" x 1.8")
Weight 480 g (16.9 oz)
Operating temperature -10° to +60° C
Humidity 20-90% non-condensing

 

Due to continuous product improvement, specifications are subject to change without notice.



 WR-G526e/DSP General Information
 WR-G526e/DSP Software Support
 WR-G526e/DSP-EP Experimental Platform
 WR-G526e Front-End
 How to Order

Interested? Please use our Rapid Response Form to register your interest in this product, or to request more information.