|
This device provides a means to inject DC power in a coaxial cable, to power remotely-located devices such as active antennas,
low-noise amplifiers and downconverters. It features with a very flat frequency response, making it possible
to use this device in a very wide frequency range, from DC to 4 GHz. |
The WiNRADiO WR-BT-12 Power Injector is especially suitable for use with WiNRADiO WR-DNC-3500 Frequency Downconverter or the WR-LNA-3500 Low Noise Amplifier.
Installation
|
In this example, the WR-DNC-3500 downconverter is placed close to the antenna and powered via the coaxial cable. On the receiver side, the power is injected
in the coaxial cable using the WiNRADiO WR-BT-12 Bias 'T' device. Such arrangement makes it possible
to minimize losses in the cable if the antenna is located at a greater distance from the receiver.
|
Technical Specifications
| Frequency range |
DC to 4000 MHz |
| Insertion loss |
2 dB |
| Connectors |
2 x SMA
Power jack OD=5.5mm ID=2.5mm (center positive) |
| Power |
15V DC max @ 200 mA max |
| Enclosure |
Diecast aluminium |
| Size |
60 x 35 x 30 mm (2.3 x 1.4 x 1.2 in)
(excluding connectors) |
| Weight |
100 grams (3.8 oz) |
Specifications are subject to change without notice due to continuous product development and improvement.
 Register your interest here!
|
Frequency range 0 to 4000 MHz